AEG Solo combo 15 - Manual (Page 24)

22
tEnter the current time and press
to confirm. The default time format is “24 HOURS”.
>For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
>For 12-hour format, enter the time and then press to select AM or PM.
>If you make a mistake, press to delete the last digit entered.
>A confirmation tone is played.
tPress to return to standby mode.
13.1.1 Change the Time Format on your Cordless Handset
The time can be displayed either as 12-hour or 24-hour. The default setting is “24 HOURS”.
tFrom the home screen, press
.
tPress
to “CLOCK&ALARM” and then to select.
tPress
to “SET FORMAT” and then press to select.
tPress again to select “TIME FORMAT”.
>The current setting is displayed.
tPress to select “12 HOURS” or “24 HOURS” and then press to confirm.
>A confirmation tone is played.
tPress to return to standby mode.
13.1.2 Change the Date Format on your Cordless Handset
The date can be displayed either as Month/Day or Day/Month. The default setting is “DD/MM”.
tFrom the home screen, press
.
tPress
to “CLOCK&ALARM” and then to select.
tPress to “SET FORMAT” and then press to select.
tPress
to “DATE FORMAT” and then press to select.
>The current setting is displayed.
tPress
to select “DD/MM” or “MM/DD” and then press to confirm.
>A confirmation tone is played.
tPress to return to standby mode.
13.2 Alarm Settings on your Cordless Handset
An alarm can be set on a handset, to sound at a set time only once or repeated each day.
When an alarm is set, the alarm icon is shown on the handset display.
When the alarm time is reached, the handset will flash “-ALARM-” on the display and sound an alarm
for 1 minute, at the same volume setting as the handset ringer. If the ringer is off, it will ring at volume
setting 1. When the alarm rings, you can press any key on the handset to stop the ringing, even if the
keylock is activated.
tFrom the home screen, press
.
tPress to “CLOCK&ALARM” and then press to select.
tPress
to “ALARM” and then press to select.
tPress to an alarm option.
>“OFF”: Turn alarm off
>“ON ONCE”: The alarm sounds once at the set time.
>“ON DAILY”: The alarm sounds daily at the set time.
tPress
to select the option.
tIf “ON ONCE” or “ON DAILY” is selected, enter the desired hour and minute.
>Press to select “AM” or “PM” if the time is in 12-hour format.
tPress
to confirm the alarm setting.