7handset & base connection, 8using your cordless handset – AEG Solo combo 15 User Manual
Page 10

8
7
HANDSET & BASE CONNECTION
tWhen purchased, all handsets are already registered to the base unit and should link to it when they
are all powered up.
tTo use your cordless handset and base unit together, you must be able to establish a radio link
between them. The signal between the handset and the base unit is in accordance with the normal
standards for a DECT phone: Maximum range up to 300 metres outdoors or 50 metres indoors.
Be aware that:
>Large metal objects, such as refrigerators, mirrors or filing cabinets, between the handset and the
base unit may block the radio signal.
>Solid structures, such as walls, may reduce the signal strength.
>Electrical equipment may cause interference and/or affect the range.
tDo not place the base unit close to another telephone, TV or audio equipment - it may cause
interference.
tPutting the base unit as high as possible ensures the best signal.
tOut of Range warning. If you hear a warning tone during a call, and/or the sound in the earpiece
becomes faint or distorted, you may be going out of range of the base unit. Move nearer to the base
unit within 20 seconds; otherwise the line may be cut off.
8
USING YOUR CORDLESS HANDSET
8.1
Make a Call
8.1.1 Pre-dialling
tEnter the phone number (maximum 24 digits).
tIf you make a mistake, press
to delete the last entered number.
tPress to dial the phone number.
8.1.2 Direct
Dialling
tPress .
tDial the number (maximum 24 digits).
8.1.3
Call from the Redial List
tPress
key in standby mode.
>The last number dialled is displayed.
tPress
to select the desired entry in the redial list and then press to dial out the selected
redial number.
8.1.4
Call from the Call Log
tPress
in standby mode.
tPress
to select the desired entry in the call log and then press to dial out the selected call
log number.