AEG Solo combo 15 - Manual (Page 13)

11
UK
tPress on a called handset to answer the internal call, where both internal callers can talk.
tTo end the intercom call, press on either handset.
Note:
tYou can cancel the intercom call before it is answered by pressing
or on the originating handset.
tIf there is no answer from the called handset or corded base within one minute, the paging will be
cancelled automatically.
8.13 Answer an External Call during an Intercom Call
You will hear an alert tone when you receive an incoming external call during an intercom call, and you
can choose from the following options:
tPress to cancel the intercom call and let the corded base and cordless handsets receive normal
incoming ringing.
tPress to answer the incoming call and end the intercom call.
tPress
to answer the incoming call and put the intercom call on hold.
tWhen the incoming call is connected and the intercom call is on hold, press and hold
to start a
three-party conference call with both the incoming and the intercom parties.
tWhen one handset is connected to an external call, you can press on another handset to enter
into a three-party conference call directly.
8.14 Initiate an Intercom during a Call
You can intercom with another system handset or the corded base during a call, or invite another
system handset or the corded base to join in a conference call with you and the external caller.
tDuring the call, press
to put the external call on hold.
>Intercom with the corded base is established immediately if there is only 1 registered cordless
handset.
>If there are more than 2 registered cordless handsets, the handset numbers which are available for
intercom will be displayed.
tPress the handset number you wish to call, press 0 to call the corded base, or press to call all
handsets.
Note:
If there is no answer from the called handset or the corded base, or you wish to cancel the intercom
call before it is answered, press
to return to the external call.
tPress on the called handset or pick up the corded handset from the corded base to answer the
internal call, where both internal callers can talk.
tWhen the intercom call is connected, you can choose from the following options on the originating
handset:
>Press and hold for 2 seconds to connect both handsets to the call in conference mode.
>Press on either cordless handset or return the corded handset to the corded base to terminate
the intercom, and leave the external call connected to the remaining handset.
8.15 Transfer an External Call to another Handset
tDuring the call, press
to put the external call on hold.
>Intercom with the corded base is established immediately if there is only 1 registered cordless
handset.