AEG Solo combo 15 - Manual (Page 12)

10
8.8 Switching the Handset On/Off
tPress and hold for more than 2 seconds to switch the handset on or off in standby mode.
>The display will show “SEARCHING...” until the handset finds the base.
Note:
You can switch the handset off to save battery life, if the handset is not on the base or a charger pod
and you do not want to use it for a while.
Important:
When the handset is OFF, it cannot be used for making calls including emergency calls. It will not ring
when there is an incoming call. To answer a call, you will need to switch it back on and it may take some
time for the handset to re-establish a radio link with the base unit.
8.9 To Lock/Unlock the Keypad
You can lock the keypad to avoid making calls or pressing the keys accidentally.
tIn standby mode, press and hold
key for 2 seconds to lock the keypad.
>The handset displays “KEYS LOCKED”.
tTo turn the keypad lock off, press and hold
again.
Note:
Incoming calls can still be answered even if the keypad is locked.
8.10 Make an Internal Call
The system allows an intercom call between two handsets registered to the same telephone base, or a
cordless handset and the corded handset. It also allows you to transfer external calls from one handset
to another, and set up a 3-way conference with two handsets and an external call.
If you try to make a call while another handset is already on an external call, you will hear a busy tone
for a few seconds before the display returns to standby.
8.11 Initiate an Intercom Call to the Corded Base
tIn standby mode, press .
>Intercom with the corded base is established immediately if there is only one registered cordless
handset.
>If there are more registered cordless handsets, the handset numbers which are available for
intercom will be displayed. Press 0 to call the corded base.
tPress or pick up the corded handset from the corded base to answer the internal call, where both
internal callers can talk.
tTo end the intercom call, press on the corded base or return the corded handset to the cordless
base.
Note:
If there is no answer from the corded base, or you wish to cancel the intercom call before it is answered,
press
to return to the external call.
8.12 Initiate an Intercom Call with another Registered Cordless Handset
tIn standby mode, press .
>The handset numbers which are available for intercom will be displayed.
tPress the handset number you wish to call, or press to call all handsets, including the corded
base.