Xerox WorkCentre XD103f Digitaler Kopierer - Laserdrucker-10252 - Manual (Page 52)

44
WorkCentre XD Properties (Printer Driver)
The purpose of this section is to provide information about how to access
and use the options in the Xerox WorkCentre XD Printer Driver Properties
dialog. Use the Xerox WorkCentre XD Properties dialog to change the
settings used for printing.
There are several ways to display the Printer Driver dialog, including:
• Displaying the Driver Properties dialog from an application
• Displaying the Properties dialog from the Start Menu
• Displaying the Properties dialog from the Xerox Printer Services
Program (Status Monitor)
Displaying the Driver Properties dialog from an
application
Control of the driver settings is provided from the Xerox WorkCentre
XD Properties (Printer Driver) dialog box. The new driver settings will
be active while the application is open. The driver settings will return to
the prior values when the application is exited.
Access to the Properties dialog will vary depending upon the
application that is in use.
Note: The application may override any options that are selected
using the Properties Dialog.
Windows 95/98 and NT:
1. Click Print on the application’s File menu
2. If not selected, select the Xerox Document WorkCentre XD printer
3. Click the Properties button
4. Change the print options and click OK
Windows 3.1x:
1. Click Print on the application’s File menu
2. Click the Printer Setup button
3. If not selected, select the Xerox Document WorkCentre XD printer
4. Click the Options button
5. Change the print options and click OK