Xerox WorkCentre XD103f Digitaler Kopierer - Laserdrucker-10252 - Manual (Page 43)

35
Single Pass Feeder Misfeed/Automatic
Document Feeder
When a misfeed occurs in the feeder, the red SPF/ADF misfeed indicator
flashes on the Copier Diagram, and an A1 or A2 status code will flash in
the display window. The status code indicates the number of originals that
must be returned to the feeder after clearing the misfeed.
A1 status code- refeed the last original.
A2 status code- refeed the last 2 originals.
This code will disappear when copying is resumed or the clear key is
pressed.
Details for clearing the three types of feeder misfeeds are given below.
Input Misfeed
1. Open the feeding roller cover and pull
the original gently to the left and out of
the document feeder tray.
2. Close the feeding roller cover.
3. Open and close the document cover to
clear the misfeed indicator.
4. Press Start to continue copying.
Exit Misfeed
1. Open the document cover and turn the
roller knob to remove the misfed
original from the exit area.
If paper cannot be easily removed, skip
to the Roller Misfeed.
2. Close the document cover.
3. Press Start to continue copying.
Roller Misfeed
1. Open the document cover and turn the
roller knob to remove the misfed
original from the document feeder tray
or the exit area. If the original is difficult
to remove, gently remove it from under
the feeding roller.
2. Close the document cover.
3. Press Start to continue copying.