Atlantis Land A02-RA241-W54 - Manual (Page 80)

WIRELESS ROUTER ADSL2+
74
Problems with the WAN Interface
Problem Corrective Action
Initialization of the
PVC connection
failed.
Ensure that the cable is connected properly from the
ADSL port to the wall jack. The ADSL LED on the front
panel of the ADSL Firewall Router should be on. Check
with your VPI, VCI, type of encapsulation and type of
multiplexing settings are the same as what you
collected from your telephone company and ISP.
Reboot the Wireless Router ADSL2+. If you still have
problems, you may need to verify these variables with
the telephone company and/or ISP.
Problems with the LAN Interface
Problem Corrective Action
Check the Ethernet LEDs on the front panel. The LED
should be on for a port that has a station connected. If it
is off, check the cables between your Wireless ADSL
Router and the station. Make sure you have uninstalled
any software firewall.
Can’t ping any station
on the LAN.
Verify that the IP address and the subnet mask are
consistent between the Wireless Router ADSL2+ and
the workstations.