Atlantis Land A02-RA241-W54 - Manual (Page 79)

WIRELESS ROUTER ADSL2+
73
WAN interfaces in the web configurator (LAN; WAN). Select None to disable IP multicasting
on these interfaces.
3.6.4 SAVE Config
After changing the router’s configuration settings, you must save all of the configuration parameters to
FLASH to avoid losing them after turning off or resetting your router. Click Save to write your new
configuration to FLASH.
Chapter 4
Troubleshooting
If the Wireless ADSL Router is not functioning properly, you can refer first to this chapter for
simple troubleshooting before contacting your service provider. This could save you time and
effort but if the symptoms persist, then consult your service provider.
Problems Starting Up the Wireless ADSL Router
Problem Corrective Action
None of the LEDs are
on when you turn on
the Wireless ADSL
Router.
Check the connection between the adapter and the
ADSL Firewall Router. If the error persists, you may
have a hardware problem. In this case you should
contact technical support.