beautypg.com

4 factory default settings, 1 username and password – Atlantis Land A02-RA241-W54 User Manual

Page 23

background image

WIRELESS ROUTER ADSL2+

17


3.4 Factory Default Settings

Before configurating this Wireless Router ADSL2+, you need to know the following default
settings.

• Username: admin
• Password : atlantis
• IP Address : 192.168.1.254
• Subnet Mask : 255.255.255.0
• DHCP server is enabled.
• Wireless: SSSID= wlan-ap, Channel=6, WEP=disable

3.4.1 Username and Password

The default username and password are admin and atlantis respectively.

If you ever forget the password to log in, you may press the RESET button to
restore the factory default settings. After turning the router on press the
Emergency/Failure Recovery Button on the back of the modem, and hold the
button in until all lights on the modem flash and it reboots with factory default
settings. The login will be reset to admin and the password will be reset to
admin, and the modem will be accessible via its default IP address at
http://192.168.1.254/