Configuration, Chapter 3, 1 before configuration – Atlantis Land A02-RA241-W54 User Manual
Page 15: 2 connecting the wireless router adsl2

WIRELESS ROUTER ADSL2+
9
Chapter 3
Configuration
The Wireless Router ADSL2+ can be configured with your Web browser. The web browser
is included as a standard application in the following operation systems, UNIX, Linux, Mac
OS, Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and user-
friendly interface for configuration.
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that communicate
with the Wireless Router ADSL2+, either to configure the device or for network access.
These PCs must have an Ethernet interface (or wireless adapter) installed properly, be
connected to the ADSL Wireless Router either directly or through an external repeater hub,
and have TCP/IP installed and configured to obtain an IP address through a DHCP server or
a fixed IP address that must be in the same subnet of the ADSL Firewall Router. The default
IP address of the Wireless Router ADSL2+ is 192.168.1.254 and subnet mask is
255.255.255.0. The best and easy way is to configure the PC to get an IP address from the
Wireless Router ADSL2+. Also make sure you have UNINSTALLED any kind of software
firewall that can cause problems while accessing the 192.168.1.254 IP address of the router.
Please follow the steps below for PC’s network environment installation. First of all, please
check your PC’s network components. The TCP/IP protocol stack and Ethernet network
adapter must be installed. If not, please refer to MS Windows related manuals.
Any TCP/IP capable workstation can be used to communicate with or
through the Wireless Router ADSL2+. To configure other types of
workstations, please consult the manufacturer’s documentation.
3.2 Connecting the Wireless Router ADSL2+
• Connect the Wireless Router ADSL2+ to a LAN (Local Area Network) and the
ADSL/telephone network.
• Power on the device
• Make sure the PWR (WLAN LED is blinking) is lit steady & LAN/ADSL LED is lit.
• Before taking the next step, make sure you have uninstalled any software firewall.