Konica Minolta Print Status Notifier - Manual (Page 37)

Using Print Status Notifier 3
Print Status Notifier 3-30
3.8 Checking the job information manually
If User Authentication is disabled on the device, manually register the job to
be monitored in order to begin monitoring the device job.
Job information can be checked manually only for devices where the “ Mon-
itored the jobs executed by the device (copy, fax, etc.) ” check box was
selected.
2
Note
To start monitoring a job manually, the job number that is displayed on
the operation panel of the device is required. After a job is executed, be
sure to note the job number that is displayed on the operation panel.
3.8.1 Starting the monitor
The job monitor can be started manually by following the procedure de-
scribed below.
Operating procedure
1
Right-click the Print Status Notifier icon in the taskbar, and then click
“
Manual Job Monitoring Registration ” in the menu that appeared.
The Manual Job Monitoring Registration dialog box appears.