4 setting flow, Operating procedure, Setting flow -6 – Konica Minolta Print Status Notifier User Manual
Page 13: Operating procedure -6
Using Print Status Notifier
3
Print Status Notifier
3-6
3.4
Setting flow
To notify the user of the job information, the settings described below are re-
quired.
Operating procedure
1
Check that the device to be monitored is registered.
–
If it is not yet registered, register the device to be monitored.
% Refer to “Registering devices to be monitored” on page 3-11.
2
Specify the method for job information notification.
–
% Refer to “Specifying the notification method” on page 3-20.
2
Note
If user authentication is enabled on the device, the authentication set-
tings for logging in to the device must be specified.
% Refer to “Specifying authentication settings” on page 3-16.