beautypg.com

Surveillance-set [1] [2] [6] [5 – Aiphone Ja-2hcd User Manual

Page 10

background image

- 10 -

9-2

Surveillance / Absence-SET

1. The flashing SET button indicates visitor(s) called during your

absence.

2. Number of visitors is shown on the screen. Example: 2/5

(2nd/# total visits).

3. When motion detection surveillance camera is installed: After 1

minute, the camera is placed in surveillance mode. When
motion detector is activated, inside monitor turns on and a
unique alarm sounds and saves the image.

4. At approx. 1 second after activation, a picture will be taken. If

recording mode is set in 4-frame mode, pictures will be taken
in 4-second intervals, starting at 1 second (1, 5, 9, and 13
seconds after activation).

5. Both alarm sound and image will automatically time out in

approx. 30 seconds. Alarm may be silenced.

6. Press TALK button. The alarm stops. Press TALK again to turn

off image. Communication is not available.

Notes:
• To change setting on camera and motion detector, refer to

instruction manual(s) for those components.

• Automatic update

When capacity is exceeded, the saved pictures will be erased
from the oldest one first, with each new one replacing the oldest
(including non-replayed images).
Note: The image can be saved in memory if needed.

Surveillance-SET (Absence-SET)

Press “SET” button once. The button is lit in red. The system goes
into “Absence-SET” mode or Motion-detection Camera-SET”
mode.
Press “SET” button to reset. The button is no longer lit.
Notes:

Press and hold “SET” button for 2 seconds or more to go into
INITIAL PROGRAM mode.
When “SET” button is flashing, view newly recorded pictures
first by pressing PLAY button.
When the button is steadily lit, press “SET” to return to normal.

9-1

Erase

While replaying

Display the picture to be erased on monitor. Holding down SET
button, press “REC” for 2 sec. Next picture appears. Release
“REC” button.

Note:

This also applies to erasing saved pictures. The picture, once
erased, cannot be restored. One picture in 4-frame mode cannot
be erased, but all four at once.

To erase all the pictures

Return to initial picture save mode, and change to any other
mode (16 in 4-frame, 32, or 60).

8-5

9

SURVEILLANCE-SET

[1]

[2]

[6]

[5]

2 / 5

Number Total

1 / S E P / 0 1 1 4 : 3 0

2/5

[4]

[3]

PLAY

Prrrrrrrr :1

Prr Prr :2

SET

PLAY

[1]

[2]

SET

JA-2MECD

JA-2MECD

1 2 / O C T / 0 3 1 4 : 3 0

1 4 / O C T / 0 3 1 3 : 3 0

2001 S

EP 1 1

5:30

JA-2MECD

SET

REC

This manual is related to the following products: