Konica Minolta magicolor 1690MF - Manual (Page 85)

Speed Dialing 6-4
7
Press the Back key.
"
To delete another destination, repeat the procedure from step 5.
8
Press the + or , key to select FINISH , and then press the Select key.
The destination is deleted from the favorite list.
"
To return to the Fax mode screen, continue pressing the Back key
until the Fax mode screen appears, or press the Stop/Reset key.
Speed Dialing
Registering a Speed Dial Destination
Frequently specified fax numbers (maximum of 220) can be registered as
speed dial destinations. In addition, batch transmission settings can be spec-
ified.
1
Press the + or , key to select UTILITY, and then press the Select key.
"
For details on selecting a menu, refer to “General Procedure for Spec-
ifying Settings in Utility Menu” on page 2-30.
2
Press the + or , key to select DIAL REGISTER, and then press the
Select key.
3
Press the + or , key to select SPEED DIAL, and then press the Select
key.
The SPEED DIAL screen appears.
4
Use the keypad to type in the speed dial number (1-220), and then press
the Select key.
"
If LDAP search settings have been specified, a screen allowing MAN-
UAL SETTING
or LDAP SEARCH to be selected appears after the
Select key is pressed. Select MANUAL SETTING , and then press
the Select key
"
For details on entering/editing numbers, refer to “Entering Text” on
page A-3.
"
If the destination is already registered with the specified speed dial
number, REGISTERED! appears. Press the Back key to return to the
DIAL REGISTER screen, and then continue with step 3.
5
Enter the name of the speed dial destination to be registered, and then
press the Select key.
"
Text up to 20 characters long can be entered for the name.