Error messages on the message window 8-6 – Konica Minolta magicolor 1690MF User Manual
Page 101

Error Messages on the Message Window
8-6
LINE PROBLEM
CHECK LINE
The telephone dialing
system or telephone
wiring system is not
set correctly.
The telephone cable
is not attached cor-
rectly.
Check the telephone dialing
system or telephone wiring
system and use the appropri-
ate configuration menu to
make the correct settings.
Correctly connect the tele-
phone cable.
MEMORY FILE FULL
The number of items
registered in the
memory has
exceeded the maxi-
mum allowed.
If MEMORY RX MODE is set to
ON
, cancel memory reception
mode, and print received doc-
uments stored in the memory.
MEMORY FULL
While sending a fax,
the size of the data for
the scanned image
has exceeded the
capacity of the mem-
ory.
While receiving a fax,
the size of the data for
the scanned image
has exceeded the
capacity of the mem-
ory.
If MEMORY RX MODE is set to
ON
, cancel memory reception
mode, and print received doc-
uments stored in the memory.
Send the fax manually.
NOT AVAILABLE
The menu cannot be set. For details on the menu settings,
refer to “Utility Menu” on
page 2-17
NOT FAX NO.
When the destination for
the scan data was speci-
fied, an e-mail address
registered in the favorite
list or as a speed dial
destination or group dial
destination has been
selected.
Directly type in the destination for
the fax data, or specify a fax
number registered in the favorite
list or as a speed dial destination
or group dial destination.
Error message
Cause
Solution