Konica Minolta magicolor 1690MF - Manual (Page 40)

Utility Menu 2-29
REPORTING
Specify report settings by selecting REPORTING in the UTILITY menu.
ACTIVITY REPORT
Settings
OFF / ON
After every 60 transmissions/receptions, a
report can be printed to show the results of the
transmissions/receptions. Select whether the
report is printed automatically when the 60th
transmission/reception is reached.
TX RESULT REPORT
Settings
ON / ON(ERROR) / OFF
Select whether the report showing the result of
a transmission is printed automatically after the
transmission is finished.
„ ON : Prints the report after each transmis-
sion.
„ ON(ERROR) : Prints the report after a
transmission only if an error occurred.
„ OFF : Does not print the report after each
transmission, even if an error has
occurred.
The transmission result report is normally
printed after a broadcast transmission.
RX RESULT REPORT
Settings
ON / ON(ERROR) / OFF
Select whether the report showing the result of
a reception is printed automatically after the
reception is finished.
„ ON : Prints the report after each reception.
„ ON(ERROR) : Prints the report after a
reception only if an error occurred.
„ OFF : Does not print the report after each
reception, even if an error has occurred.