Basic fax operation, Sending a fax using the adf, Basic fax operation -2 – Konica Minolta magicolor 1690MF User Manual
Page 45: Sending a fax using the adf -2

Basic Fax Operation
3-2
Basic Fax Operation
This section contains basic information of fax transmission.
"
Documents with the following paper sizes can be faxed.
Original size: A5/A4/Statement/Letter (when using the original glass)
Width: 140 to 216 mm
Length: 148 to 500 mm (when using the ADF)
Sending a Fax Using the ADF
If the ADF is used, original documents containing multiple pages can be auto-
matically scanned.
"
Do not load original documents that are bound together, for example,
with paper clips or staples.
"
Do not load more than 35 sheets; otherwise an original document mis-
feed or damage to the document or machine may occur.
"
If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
"
Do not open the ADF cover while documents loaded into the ADF are
being scanned.
1
Press the Fax key to enter Fax mode.
"
If the initial mode (UTILITY - MACHINE SETTING - INITIAL MODE)
is set to FAX, this step can be skipped.
2
Make sure that there is no document on the original glass.
3
Put the document into the ADF
document feed tray face up.
4
Adjust the document guides to the document size.