Konica Minolta bizhub 40P - Manual (Page 80)

Configuration Menu Overview 70
PAPER
TYPE
Settings
PLAIN PAPER /
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the type of media that is normally
used.
PAPER
SIZE
ERROR
Settings
ENABLE /DISABLE
If ENABLE is selected, a paper size error is detected.
If DISABLE is selected, no paper size error is
detected.
UNIT
OF
MEA-
SURE
Settings
INCHES /MILLIMETERS
The units for specifying the size of custom media can
be switched between inches and millimeters.
"
The default setting for North America is
INCHES . The default setting for all other
regions is MILLIMETERS .
STARTUP
OPTIONS
DO
START-
UP
PAGE
Settings
ON/OFF
Select whether or not a startup page is printed when
the printer is turned on.
AUTO
CON-
TINUE
Settings
ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If AUTO CONTINUE is set to ON , printing automatically contin-
ues after about 10 seconds under the following conditions. At
this time, printing will be performed even if the media size is dif-
ferent.
No media: PAPER EMPTY (Page 186)/TRAY EMPTY (Page
187)
Different media size/type: PAPER ERROR (Page 186)/TRAY x
PAPER ERR (Page 187)