Konica Minolta bizhub 40P - Manual (Page 192)

Status, Error, and Service Messages 182
Error Messages (Warning: )
This message... means... do this...
DEVICE
NOT SUPPORTED
An incompatible
device is connected
to the USB port of this
printer. Use a device compatible
with the USB port of this
printer.
FUSER UNIT
END OF LIFE
The fuser unit has
reached the end of its
life. Contact Technical Sup-
port with the error infor-
mation.
HDD
NEAR FULL
The hard disk is
nearly full. Delete print jobs saved
on the hard disk.
HUBS
NOT SUPPORTED
An incompatible USB
hub is connected to
the USB port of this
printer. Use a USB hub
compatible with the USB
port of this printer.
INCORRECT
HDD
Since the hard disk
was formatted with a
different machine, the
hard disk could not be
used. Replace the hard disk
with one compatible with
this machine, or select
HDD FORMAT from
SYS DEFAULT MENU
and format the hard
disk.
INCORRECT
MEMORY CARD
Since the
CompactFlash card
was formatted with a
different machine, the
CompactFlash card
could not be used. Replace the
CompactFlash card with
one compatible with this
machine, or select
CARD FORMAT from
SYS DEFAULT MENU
and format the
CompactFlash card.
MEMORY CARD
NEAR FULL
The CompactFlash
card is nearly full. Delete resources (fonts,
forms, etc.) which saved
on the CompactFlash
card by using Download
Manager or PSWC.
NON SUPPORT
CARD
Since incompatible
CompactFlash card
was inserted into the
memory slot, the
CompactFlash could
not be used. Use CompactFlash card
compatible with this
printer.