beautypg.com

Konica Minolta bizhub 40P User Manual

Page 208

background image

Hard Disk Kit

198

5

Remove the panel.

6

Plug the cable on the hard disk
kit into the connector on the con-
troller board.

7

Mount the hard disk kit onto the
controller board as shown in the
figure, and then tighten the two
screws.

8

Reinstall the panel and tighten the two screws.

9

Attach the right side cover.

This manual is related to the following products:
See also other documents in the category Konica Minolta Printers: