Konica Minolta bizhub 40P - Manual (Page 56)

Configuration Menu Overview 46
PAPER
TYPE
Settings
ANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper
loaded into Tray 4.
SIZE
SET-
TING
Settings
AUTO /USER SELECT
If AUTO is selected, the printer
automatically detects the paper size.
If USER SELECT is selected, a user can
select the paper size.
TRAY
CHAINING
Settings
ON /OFF
If ON is selected and the specified tray runs out of
paper during printing, a tray loaded with paper of the
same size is automatically selected so printing can
continue.
If OFF is selected and the specified tray runs out of
paper, printing stops.
TRAY
MAPPING
TRAY
MAPPING
MODE
Settings
ON/OFF
Select whether or not the Tray Mapping
function is used.
LOGICAL
TRAY
0-9
Settings
PHYSICAL TRAY1/
PHYSICAL TRAY2/
PHYSICAL TRAY3/
PHYSICAL TRAY4
Select the tray that is used for printing
when a print job is received from another
manufacturer’s printer driver.
The default setting for LOGICAL TRAY
2 is PHYSICAL TRAY 2 . The default
settings for all other trays are PHYSI-
CAL TRAY 1 .
"
PHYSICAL TRAY3 and
PHYSICAL TRAY4 appear only if
an optional lower feeder unit is
installed.