Konica Minolta bizhub 40P - Manual (Page 124)

Replacing Consumables 114
Replacing Consumables
Before replacing consumables, make sure that the power of the printer is
turned off.
Note
Failure to follow instructions as outlined in this manual could result in
voiding your warranty.
Note
If an error message (TONER OUT, FUSER UNIT END OF LIFE, etc.)
appears, print out the configuration page, and then check the status of the
consumables. For details on the error messages, refer to “Error Messages
(Warning:)” on page 182. For details on printing the configuration page,
refer to “Printing a Configuration Page” on page 150.
About toner cartridge
This printer uses a toner cartridge that includes the toner and the photosensi-
tive drum. If the output image is light or blurred, the toner cartridge may be
defective or damaged. In that case, you need to replace it with a new one.
"
Handle the toner cartridge carefully to avoid spilling toner inside the
printer or on yourself.
"
Install only a new toner cartridge in your printer. If a used toner car-
tridge is installed, the indicator message will not clear and the supplies
status in the Status Monitor will not be updated.
"
The toner is nontoxic. If you get toner on your skin, wash it off with
cool water and a mild soap. If you get toner on your clothes, lightly
dust them off as best as you can. If some toner remains on your
clothes, use cool, not hot water, to rinse the toner off.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.