Konica Minolta magicolor 4690MF - Manual (Page 159)

Scanning With the Machine 147
Selecting the Scan Mode
"
These settings are available only if BW Only was selected for the
color setting.
1
In the main screen, press the + or , key to select the current scan quality
setting, and then press the Select key.
2
Press the + or , key to select MODE , and then press the Select key.
3
Press the + or , key to select MIX , TEXT or PHOTO , and then press the
Select key.
The main screen appears again.
Selecting the Scan Density
1
In the main screen, press the + or , key to select the current scan quality
setting, and then press the Select key.
2
Press the + or , key to select DENSITY , and then press the Select key.
3
Press the * or ) key to select the desired scan density.
As the indicator is moved to right, the density becomes darker.
Setting Duplex (Double-Sided) Scanning
Double-sided document pages can be scanned with the ADF.
"
These settings are available only if the document is loaded in the ADF.
If the document is scanned without being loaded in the ADF,
1-SIDE
is automatically selected, and the document is scanned from the origi-
nal glass.
"
This setting is available only if PDF is selected as the data format for
the scan image.
1
In the main screen, press the + or , key to select the current simplex/
duplex (single-sided/double-sided) setting, and then press the Select key.
2
Press the + or , key to select 2-SIDE , and then press the Select key.
3
Press the + or , key to select LONG EDGE or SHORT EDGE , and then
press the Select key.
The main screen appears again.
"
For details on LONG EDGE and SHORT EDGE , refer to “Duplex
(Double-Sided) Copying From the ADF” on page 117.