Konica Minolta magicolor 4690MF - Manual (Page 121)

Making Basic Copies 109
2
Specify the desired copy settings.
"
For details on specifying the copy mode and the copy density, refer
to “Specifying the Copy Quality Setting” on page 109.
For details on specifying the zoom ratio, refer to “Specifying the
Zoom Ratio” on page 110.
For details on selecting the media tray, refer to “Selecting the
Media Tray” on page 111.
For details on setting 2in1 and 4in1 copying, refer to “Setting 2in1/
4in1 Copying” on page 112.
For details on ID card copying, repeat copying or poster copying,
refer to “Setting a Copy Function” on page 113.
For details on duplex (double-sided) copying, refer to “Setting
Duplex (Double-Sided) Copying” on page 117.
For details on setting collated copying, refer to “Setting Collated
(Sort) Copying” on page 119.
3
Using the keypad, specify the desired number of copies.
"
If the number of copies was incorrectly entered, press the Back
key, and then specify the correct number of copies.
4
To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
Copying begins.
"
If the Stop/Reset key is pressed while copying, JOB CANCEL
appears. To stop copying, select YES . To continue copying, select
NO .
Specifying the Copy Quality Setting
Select the copy mode and density appropriate for the contents and density of
the document to be copied.
Selecting the Copy Mode
1
In the main screen, press the + or , key to select the current copy quality
setting, and then press the Select key.
2
Press the + or , key to select MODE , and then press the Select key.
3
Press the + or , key to select MIX , TEXT , PHOTO , FINE/MIX , FINE/
TEXT or FINE/PHOTO , and then press the Select key.
The main screen appears again.