Konica Minolta magicolor 4690MF - Manual (Page 154)

Scanning With the Machine 142
Registering Speed Dial Destinations (LDAP Search)
E-mail addresses can be registered as speed dial destinations by using infor-
mation on the LDAP server. A maximum of 250 speed dial destinations can
be registered.
"
To connect to an LDAP server, settings for LDAP SETTING must be
specified. For details, refer to the Reference Guide on the Documenta-
tion CD/DVD.
"
Machine key operations cannot be used to register an FTP address or
SMB address as a speed dial destination. These addresses can be
registered with PageScope Web Connection. For details, refer to the
Reference Guide on the Documentation CD/DVD.
"
Speed dial destination numbers 221 to 250 are reserved for register-
ing FTP addresses and SMB address from PageScope Web Connec-
tion.
1
In the main screen, press the + or , key to select UTILITY , and then
press the Select key.
2
Press the + or , key to select DIAL REGISTER , and then press the
Select key.
3
Press the + or , key to select SPEED DIAL , and then press the Select
key.
4
Use the keypad to type in the number (between 1 and 220) for the speed
dial destination, and then press the Select key.
5
Press the + or , key to select LDAP SEARCH , and then press the
Select key.
"
If an LDAP server is not specified, LDAP SEARCH does not
appear.
6
Press the + or , key to select NAME or E-MAIL , and then press the
Select key.
"
To search registered names, select NAME . To search e-mail
addresses, select E-MAIL .
7
Use the keypad to type in the search keyword (maximum of 10 charac-
ters), and then press the Select key.
The search begins, and the search results appear after a while. If no data
matches the search keyword,
NOT FOUND appears for about two sec-
onds.
"
For details on entering/editing text, refer to “Entering Text” on page
265.