Konica Minolta bizhub PRESS C1060 User Manual
User documentation, Image enhance visual editor, Printing
45115287
© 2013 Electronics For Imaging
30 July 2013
*45115287*
Customer Release Notes
Fiery Color Server, Version 1.0
This document contains important information about this release. Be sure to provide this
information to all users before proceeding with the installation.
N
OTE
:
This document uses the term “Fiery Color Server” to refer to the Fiery
®
ES IC-415/
Fiery
®
CS IC-308.
User
documentation
Where can I find the user documentation?
For complete information on the Fiery Color Server, including updates to the customer
release notes, go to
.
Image Enhance
Visual Editor
Working with duplicate jobs
In Image Enhance Visual Editor, changes are applied to both the selected job and any
duplicates of the selected job.
Printing
Direct Connection limitations
The Direct connection is intended for downloading fonts and for use with test applications
that require back channel information from the Fiery Color Server. If security is a concern,
Direct connection is not recommended for printing jobs because some jobs sent to the Direct
connection cause temporary files to be stored on the Fiery Color Server. For full security, use
Secure Erase instead.
For more information, see Configuration and Setup.
Help
Viewing Help
Do not use the Google Chrome browser when viewing online help for the following
applications. The help files may not display correctly in Chrome.
• Fiery Remote Scan on Windows or Mac OS computers
• Fiery Bridge on Windows computers
• Printer driver on Mac OS computers
System
In a Fiery DHCP connection, a blank hostname displays and not the
server name configured in the Fiery Color Server
When you configure the Fiery Color Server to use a DHCP connection over a network router
with a hostname, the hostname does not appear in the router settings in a DHCP client list.
Document Outline
- User documentation
- Image Enhance Visual Editor
- Printing
- Help
- System
- Fiery Setup Wizard
- Command WorkStation
- Viewing imported jobs in landscape orientation
- Flattening error for an imposed print job
- Jobs with composite overprint and transparent objects
- After RIPping a job, black colored objects display gray dotted lines
- In Job Properties, Gang-up Preview always displays image in Portrait view
- In Fiery Impose-Compose, Sheet View always displays imported job in Portrait view
- Cannot create a booklet from a one-page document
- Use embedded profile option with APPE enabled
- Conflict message appears when Auto-Trapping is selected
- Preview of a raster job does not match the preview display in Job Properties > Booklet > Mixed Media
- Paper size settings on the printer does not match settings in Command WorkStation
- AppleTalk support
- Incorrect page order with Booklet-Perfect Left Binding
- When a merged mixed job is opened in Fiery Impose, the display of the form size is incorrect
- When multiple jobs are imported to the Held Queue in a group, the job order is not cared
- Output image of body pages from a booklet rotates 90 degrees after printing a Microsoft Word document
- Printing a document as a booklet or as a 2-up print, with 1-byte or 2-byte TrueType font from a PS file into a PDF document, sometimes results in garbled text output
- Fiery Color Server hangs temporarily when it loads 500 paper profiles from the printer
- Error message of “Calibration” is garbled
- Command WorkStation hangs on a client computer after rebooting the Fiery Color Server
- Line issue occurs when printing A4 file to A3 size
- Cannot specify a custom size setting for a 8.5 x 11 sized slip sheet
- On Command WorkStation for Mac OS, a set count larger than 15 for a new Paper Catalog entry gets saved
- Display of Processing is not localized
- Command WorkStation hangs after canceling jobs when waiting for jobs to print
- Hard disk free space does not increase after performing Factory Defaults on the printer
- Specific settings do not register with a JDF print job when Add/Map to Paper Catalog is selected and when JDF is enabled on the Fiery Color Server
- Error message is not localized after selecting Summary Print and printing a document
- Some performance test files are slower than the targeted pages per minute (PPM) rate
- Cover image of 1-up perfect is incorrect, when Front & Back Together is selected
- Output Tray menu displays blank field after changing finisher type
- Printer driver
- Change of measuring units for 1-up Perfect booklet type
- User authentication fails when registering users with two byte characters on LDAP-enabled Fiery Color Servers
- If “305x458mm” is specified in Microsoft Word 2010, “12x18” is listed instead and applied to the printer driver
- Borders do not print when setting Papers per sheet to 6-up and turning Print border on
- On Mac OS 10.8, install the driver by Find Printer By Name or Address, job cannot be output
- Cannot print a perfect bind document with the Windows and Mac OS printer driver when using European languages
- Fiery Color Server stops printing a document that has many pages and N-up setting
- Fiery Impose
- Fiery JDF
- Fiery Remote Scan
- Scan
- Cannot acquire files from a mailbox in Fiery Remote Scan
- Scan error message does not display after scanning files larger than 2 GB
- FTP scan log displays OK status for scan destinations even if FTP scan is disabled
- Job mismatch with scan jobs
- Scan 1,000 pages to HDD, incorrect job size is displayed in Fiery Remote Scan and cannot save job file correctly
- Garbled characters appear in scanned print job file name
- FTP file name two byte characters have a garbled phenomenon
- Paper Catalog
- Printer
- On the Web LCD, logging into the printer with login name and password on first attempt does not work
- Status always displays “Printing” on the Web LCD after printing a copy job
- Image output orientation displays incorrectly with certain booklet and binding settings
- When using Port 9100 and Sequential Print, job of the Secure print cannot complete printing
- Other applications
- Adobe Reader X does not recognize “Fit” size option for printing
- Image rotation occurs for a job with 1-up Perfect and Left binding specified and with custom size settings
- Output error with printing a Microsoft Excel document with multiple spreadsheets on the Fiery Color Server
- Printing DocuWorks file with Gang-up setting results in extra lines on some pages
- Some PDF jobs with black letters cannot preserve a K value 100% by the Fiery Color Server
- Images do not print correctly with solid color objects
- Misalignment and scale problems with folded and stapled brochure prints
- Image objects that are pasted onto solid color objects print two black color layouts
- RIPing process delayed with a PDF document with spot color and APPE enabled