beautypg.com

Konica Minolta bizhub PRESS C1060 User Manual

Page 11

background image

11

Misalignment and scale problems with folded and stapled brochure
prints

When you change the size of A4 folded and stapled brochure PDF documents to A5 and print
the document, the print output may not display the correct alignment and scale settings.
Change the original document to A5 before importing it into Command WorkStation to
print.

Image objects that are pasted onto solid color objects print two black
color layouts

When you import a document with an image that blends with a solid color black background,
set Color Mode to either CMYK or Grayscale and then print the document, sometimes the
print output displays separate black colors instead of gradient colors.

In Command WorkStation, do one of the following:

• In Color Management > Expert Settings > Gray & Black Processing, set the Black text and

graphics setting to Normal to prevent text and graphics from using only black toner ink.

• In Color Management > Expert Settings > Color Input, for CMYK/Grayscale, set the

Source to Bypass conversion, and set the Black text and graphics setting to Normal.

RIPing process delayed with a PDF document with spot color and APPE
enabled

If APPE is enabled, RIPping for a PDF document that includes spot color may take longer
than 10 minutes. Disable APPE to not encounter a delay in RIPping a PDF document with
spot color.

This manual is related to the following products: