Konica Minolta bizhub PRESS C1060 - Manual (Page 2)

2
Fiery Setup Wizard Invalid IP address error message appears in Fiery Controller Setup
when you enter an IP address
When this issue occurs, enter any IP address for a WINS server even if the WINS server
setting is turned off.
Command
WorkStation Viewing imported jobs in landscape orientation
If you import a job that is set in landscape orientation in Command WorkStation and preview
the job in either Sheet View (Fiery Impose/Compose) or Gang-up Preview (Job Properties),
the images always display in portrait orientation.
Flattening error for an imposed print job
In Command WorkStation, when you import and impose an archived job, sometimes
flattening errors occur when you save the job as a PDF file. Use server-side imposition by
saving the imposition job as a .dbp file.
Jobs with composite overprint and transparent objects
When composite overprint and APPE is enabled, if a job includes transparent objects,
composite overprint may not appear. Click Expert Settings in the Color tab and set “Separate
RGB/LAB to CMYK source” to ON.
After RIPping a job, black colored objects display gray dotted lines
When you import a RIPped job to the Held Queue and open it in ImageViewer,
magnification levels 200% to 400% of the job reveal gray dotted lines displaying over some of
the black-colored objects. Disable the Composite overprint option in Job Properties, and set
the Black overprint option to Off in Job Properties, and then click Color > Expert Settings >
Gray and Black Processing.
In Job Properties, Gang-up Preview always displays image in Portrait
view
When you preview a job that contains a Microsoft Word document that is previously set to
Landscape orientation, Job Properties displays the document in Portrait orientation.
In Fiery Impose-Compose, Sheet View always displays imported job in
Portrait view
When you preview an imported job that is set to Landscape orientation, Sheet View displays
the document in Portrait orientation.
Cannot create a booklet from a one-page document
A one-page document cannot be printed as a booklet. If you try to create a booklet from a
one-page document, an error message appears.