Fiery jdf, Enabling device capabilities, Fiery remote scan – Konica Minolta bizhub PRESS C1060 User Manual
Page 8: Scan, Job mismatch with scan jobs
8
Merged jobs with Composite overprint and transparent objects
If the merged job has overprint objects or semi-transparent objects, bottom side objects are
not printed. Set “Composite overprint” in Color tab of Job properties.
Fiery JDF
Enabling Device Capabilities
By default, the Device Capabilities file is not automatically installed on the Fiery Color
Server. To install the file, open configuration.txt in C:\Windows\system\system32\. Under
[DevCap], change the “EnableAutoCreate” value from 0 to 1. Save configuration.txt and
restart the Fiery Color Server.
Fiery Remote Scan
Fiery Remote Scan version 6 TWAIN driver is 32-bit only
The 64-bit version of the TWAIN driver is not supported for Fiery Remote Scan version 6.0.
Scan
Cannot acquire files from a mailbox in Fiery Remote Scan
When you import a multi-page job into the Held Queue of Command WorkStation and use
Fiery Remote Scan to insert scanned pages from an admin mailbox, the Acquire button is
grayed out and you cannot retrieve files.
Scan error message does not display after scanning files larger than
2 GB
When you try to scan files that are larger than 2 GB, which is the maximum file size for
scanned files, the file does not get scanned.
FTP scan log displays OK status for scan destinations even if FTP scan
is disabled
In Configure, if “Email,” “Windows SMB,” and “FTP” are enabled, and “Enable “Scan” is
disabled, scan jobs sent to email, SMB, and FTP locations still go through if you process them
from the printer touch panel.
Job mismatch with scan jobs
If you perform a scan job from the printer and then try to scan the same job in Fiery Remote
Scan, job mismatch occurs. Change the Media Size setting from “Custom” to either
“Automatic” or the required paper size as specified under “Crop Box” when inserting a
scanned image.
Scan 1,000 pages to HDD, incorrect job size is displayed in Fiery
Remote Scan and cannot save job file correctly
Reduce the job file size to under 2 GB for a single scan job. The Fiery Color Server has a 2 GB
maximum file size limit for scan jobs.