Konica Minolta BIZHUB C450 - Manual (Page 286)

Specifying Settings Using PageScope Web Connection 4
C450 4-27
Spe
c
if
ying
Set
ti
ng
s Usin
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 4
When “FTP: Scan” is selected
Item Description
No. Enter the registration number.
Name Enter the registration name (up to 24 characters).
Select from Address
Book Click , and then select the destination from the list to display the
one-touch lists.
Direct Input Directly enter the destination. Specify settings for the following.
Host Address
File Path
User ID
Password
anonymous
PASV Mode
Proxy
Port Number
When entering the host name, select the “Please check to enter host
name.” check box.
Resolution Select the resolution.
File Type Select the file format.
Scan Setting Select the unit of the data to be saved.
Simplex/Duplex Enter the destination e-mail address directly.
Original Type Select the quality of the original such as text or photo.
Color Select the color mode. The file formats that can be saved may be
limited depending on the color settings. For details, refer to “File Type”
on page 2-43.
Separate Scan Select “ON” or “OFF”.
Background Removal Adjust the background density.
Scan Size Select the original size (“Auto”, “Standard Size”, “Custom Size”).
For “Custom Size”, specify the horizontal and vertical scanning sizes.
E-Mail Notification The upload destination of the file can be notified to the specified ad-
dress.
Destination Click to select the notification addresses.
File Name Enter the file name (up to 30 characters).
Original Direction Select the orientation of the original document.
Bind Select the original binding position.
Special Original Specify whether to specify a mixed original document.
Thick Original Select whether to enable a thick original document.
Book Scanning Select whether to enable book scanning.
Method If book scanning is enabled, select the scanning method type.
Center Erase When Book Copy is enabled, specify the width of the center of the
spread document to be erased.
Bind Direction If book scanning is enabled, select the binding direction.