Konica Minolta BIZHUB C450 - Manual (Page 17)

Introduction
x-16 C450
User’s Guides
The following User’s Guides have been prepared for this machine.
User’s Guide [Copy Operations]
This manual contains details on basic operations and the operating proce-
dures for the various copy functions.
-
Refer to this User’s Guide for details on operating procedures for copy
functions, including precautions on installation/use, turning the machine
on/off, loading paper, and troubleshooting operations such as clearing
paper misfeeds.
User’s Guide [Network Scanner Operations]
This manual contains details on specifying network settings for standard
equipment and on operations for scanning functions.
-
Refer to this User’s Guide for details on operating procedures for network
functions and for using Scan to E-Mail, Scan to FTP and Scan to SMB.
User’s Guide [Box Operations]
This manual contains details on operating procedures for using the boxes.
-
Refer to this User’s Guide for details on operating procedures for using
the boxes on the hard disk.
User’s Guide [Enlarge Display Operations]
This manual contains details on operating procedures for using copy, net-
work scanner and fax functions in Enlarge Display mode.
-
Refer to this User’s Guide for details on operating procedures in Enlarge
Display mode.
User’s Guide [FK-502 Facsimile Operations]
This manual contains details on operating procedures for faxing.
-
Refer to this User’s Guide for details on operating procedures for fax
functions when the fax kit is installed.
User’s Guide [Network Facsimile Operations]
This manual contains details on operating procedures for network faxing.
-
Refer to this User’s Guide for details on operating procedures for using
the network fax functions (Internet faxing, SIP faxing and IP address fax-
ing).