Konica Minolta BIZHUB C450 - Manual (Page 285)

4 Specifying Settings Using PageScope Web Connection
4-26 C450
Spe
c
if
ying
Set
ti
ng
s Usin
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 4
4.8 Program Registration
Click the Scan tab, and then click “Program”.
The information to be entered is as follows:
When “E-mail: Scan” is selected
Item Description
No. Enter the registration number.
Name Enter the registration name (up to 24 characters).
Select from Address
Book Click , and then select the destination from the list to display the
one-touch lists.
E-Mail Address Enter the destination e-mail address directly. (up to 320 characters).
Resolution Select the resolution.
File Type Select the file format.
Scan Setting Select the unit of the data to be saved.
Subject Specify the subject (Not Specified, 1 to 10). When “Not Specified” was
selected, the default title is used. Click
to check the contents.
Text Specify the text (Not Specified, 1 to 10). When “Not Specified” was
selected, the default text is used. Click
to check the contents.
Simplex/Duplex Select “1-Sided”, “2-Sided”, or “Cover + 2-Sided”.
Original Type Select the quality of the original such as text or photo.
Color Select the color mode. The file formats that can be saved may be
limited depending on the color settings. For details, refer to “File Type”
on page 2-43.
Separate Scan Select “ON” or “OFF”.
Background Removal Adjust the background darkness.
Scan Size Select the original size (“Auto”, “Standard Size”, “Custom Size”).
For “Custom Size”, specify the horizontal and vertical scanning sizes.
File Name Enter the file name (up to 30 characters).
Original Direction Select the orientation of the original document.
Bind Select the original binding position.
Special Original Specify whether to specify a mixed original document.
Thick Original Select whether to enable a thick original document.
Book Scanning Select whether to enable book scanning.
Method If book scanning is enabled, select the scanning method type.
Center Erase When Book Copy is enabled, specify the width of the center of the
spread document to be erased.
Bind Direction If book scanning is enabled, select the binding direction.
Erase Specify the width of the perimeter of the document to be erased.