Konica Minolta BIZHUB C450 - Manual (Page 204)

Specifying Settings From the Control Panel 3
C450 3-93
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
2
Note
To cancel changes to the setting, touch [Cancel].
If the host address exceeds 81 characters, touch [Details] to display the
Host Address Detail screen with the rest of the host addresses.
If the DNS setting is not specified correctly, the function does not work
properly even when the SMTP server name is entered. Refer to “TCP/IP
Settings” on page 3-48 for details on the DNS settings.
!
Detail
For the procedure to enter characters using the keyboard that appears
on the screen, refer to “Entering text” on page 6-5.
SMTP Detail
You can specify the SMTP details.
1
In the E-Mail TX (SMTP) screen, touch [Detail Setting].
The SMTP Detail screen appears.
2
Specify the desired settings.
!
Detail
To perform user authentication with POP Before SMTP, the settings that
will allow POP to access the e-mail server must be specified. For details,
refer to “E-Mail RX (POP) Settings” on page 3-96.