Konica Minolta bizhub C650 - Manual (Page 63)

Issued by BT-CSO Ver 1.03 63
1. Gather necessary information
1-1. Get [Request Code] and [Serial Number] from MFP.
Acquisition procedure: MFP panel
•MFP panel •PSWC
2. Prepare Initialization.
3. Perform Initialization
• Get [Request Code] and [Serial Number] from PSWC.
a) Login to PSWC in the Administrator mode.
b) Select [Maintenance]> [License Settings]>
[Get Request Code] and click [OK].
c) Write down displayed [Request Code] and
[Serial Number], or print this page.
*Please pay attention “U” and “V”, “0 (number)”
and “O (alphabet)”. “0 (Number)” is not used in
[Request Code].
(If you access LMS using the same PC that
access to PSWC, you can input Request Code
using Copy-and-Paste.)
d) Go on to the next [2.Prepare Initialization].