Konica Minolta bizhub C650 - Manual (Page 35)

Issued by BT-CSO Ver 1.03 35
Deactivation Procedure
The following is the step by step procedure to deactivate License Activate Base Functions.
1. Gather information form MFP/ Kit
1-1. Find [Token Number] from License Kit.
1-2. Find [Serial Number] from MFP.
2. Get Deactivation code
2-1. Access to LMS and get [Deactivation Code]
3. MFP Deactivation
3-1. Input [Deactivation Code] to MFP and deactivate functions.
3-2. Input [Deactivation Complete Code] to LMS.
When use each code, please pay attention “U” and “V”, “0 (number)” and “O (alphabet)”.
“0 (Number)” is not used in [Deactivation Code] and [Deactivation Complete Code].
Here are necessary information (operation) and acquisition procedure in the above steps.
Information (operation) Acquisition Procedure Note
Token Number Token Certificate (License Kit) 20 digits alphanumeric
Check License Kit that needs
Deactivation.
Serial Number Serial Number Label 13 digits alphanumeric
Input to LMS
Deactivation Code LMS (Web browser) 35 digits alphanumeric
Input to MFP panel
Deactivation Input to MFP panel
(Service Mode)
Deactivation Complete
Code
MFP panel (Service Mode) 35 digits alphanumeric
Input to LMS