Konica Minolta BIZHUB C253 - Manual (Page 51)

C253/C203 2-36
Administrator Operations 2
7
From the keyboard and keypad, enter a new Account Password that may consist of 8 digits.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 6.
8
Touch [OK].
? What happens if the Account Password entered does not meet the requirements of Password
Rules?
% If the Account Password entered does not comply with the Password Rules, a message appears
that tells that the Account Password entered cannot be used. Enter the correct Account Password.
For details of Password Rules, see
"Password Rules" on page 1-8 .
9
To prevent entry of a wrong password, enter the Account Password that consists of 8 digits again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 6.
10
Touch [OK].
? What happens if there is a mismatch in the Account Passwords?
% If there is a mismatch in the Account Passwords, a message appears that tells that there is a
mismatch in the Account Passwords. Perform steps 7 through 10 once again.
11
Make the necessary settings.
? What happens if the Account Name is yet to be entered?
% If the Account Name is yet to be entered, the [OK] cannot be touched. Be sure to enter the Account
Name.
12
Touch [OK].