Konica Minolta BIZHUB C253 - Manual (Page 137)

C253/C203 3-22
User Operations 3
4
Click the [OK].
? What happens if the User Box Password entered does not meet the requirements of Password
Rules?
% If the User Box Password entered does not meet the requirements of the Password Rules with
[Public] selected for User Box Type, a message appears that tells that the User Box Password that
has been entered cannot be used. Click [OK] to go back to the screen of step 3. Perform steps 3
through 4 once again. For details of Password Rules, see
"Password Rules" on page 1-8 .
? What happens if there is a mismatch in the User Box Passwords?
% If there is a mismatch in the password between that entered in the "User Box Password" box and
that entered in the "Retype User Box Password" box, a message appears that tells that there is a
mismatch in the User Box Password. Enter the correct User Box Password.
? What if no Owner Name, or a wrong one, has been entered?
% If no Owner Name is entered, a message appears that tells that no Owner Names have been en-
tered. Enter the correct Owner Name.
% If a user name not registered with the machine is entered in the "Owner Name" box, a message
appears that tells that the Owner Name entered in the box is illegal. Click [OK] to go back to the
screen of step 3. Perform steps 3 through 5 once again.
? What if no Account Name, or a wrong one, has been entered?
% If no Account Name is entered, a message appears that tells that no Account Names have been en-
tered. Enter the correct Account Name.
% If a user name not registered with the machine is entered in the "Account Name" box, a message
appears that tells that the Account Name entered in the box is illegal. Click [OK] to go back to the
screen of step 3. Perform steps 3 through 5 once again.
? What steps should be performed to change the User Box setting?
% For the procedure to change the User Box setting, see "Changing the User Box Password and
user attributes and account attributes" on page 3-23 .
5
Check the message that tells that the setting has been completed. Then, click [OK].