Konica Minolta bizhub 200 - Manual (Page 69)

3 User Operations
3-2 200/250/350
Use
r Op
er
at
ions
Chapter 3
3 User Operations
3.1 Secure Print Function
The Secure Print function allows a Secure Print specified by a corresponding
password from the PC to be used in the condition registered in the machine.
To access a Secure Print document, authentication is performed through an
8-digit password that verifies an authenticated user of the Secure Print doc-
ument. The password entered for the authentication purpose appears as “*”
or “
●” on the display. When the Enhance Security function is set to [ON], the
number of times in which authentication fails is counted.
2
Note
Enter the Secure Print ID and Secure Print Password through the printer
driver on the PC side. The Secure Print Password entered is displayed as
“*.”
The Secure Print Password must be the one consisting of 8 digits and
meeting the Password Rules requirements. Any Secure Print, the pass-
word for which does not meet the Password Rules requirements, will not
be registered in the machine. For details of Password Rules, see “Pass-
word Rules” on page 1-11.
3.1.1 Accessing the Secure Print
2
Note
For the Secure Print ID, enter the one that has been set on the printer
driver side.
If a wrong Secure Print ID is entered, a message appears that tells that
there is a mismatch in the Secure Print ID and the machine does not dis-
play the target Secure Print Document. Enter the correct Secure Print ID.
The machine rejects any Secure Print Password that consists of less than
8 digits.
For the Secure Print Password, enter the 8-digit one set on the printer
driver side.
350_security_E.book 2 ページ ２００６年１１月２０日 月曜日 午前１０時４１分