Konica Minolta bizhub 200 - Manual (Page 42)

Administrator Operations 2
200/250/350 2-25
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.6.1 Setting the HDD Lock Password
2
Note
When the main power switch is turned off, then on again, wait at least 10
seconds to turn it on after turning it off. Be sure to allow an interval of 10
sec. or more in order to ensure correct operations.
Turn off the sub power switch
→ Turn off the main power switch → Turn
on the main power switch
→ Turn on the sub power switch
Do not leave the machine with the Admin. Management mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Admin. Management mode.
0 For the procedure to call the Administrator Management 2 to the display,
see steps 1 and 2 of “Setting the Enhance Security function” on
page 2-10.
1
Call the Administrator Management 2 to the screen from the control
panel.
2
Touch [HDD Manage-
ment].
350_security_E.book 25 ページ ２００６年１１月２０日 月曜日 午前１０時４１分