1 executing overwrite all data, Setting can be made only from the control panel – Konica Minolta bizhub 200 User Manual
Page 63
2
Administrator Operations
2-46
200/250/350
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.7.1
Executing Overwrite All Data
2
Note
Do not leave the machine with the Admin. Management mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Admin. Management mode.
0 For the procedure to call the HDD Management to the display, see steps
1 and 2 of “Setting the HDD Lock Password” on page 2-25.
1
Call the HDD Management to the screen from the control panel.
2
Touch [Overwrite All Da-
ta].
3
Touch [Yes].
4
Touch [Enter].
350_security_E.book 46 ページ 2006年11月20日 月曜日 午前10時41分
This manual is related to the following products: