Konica Minolta BIZHUB 223 - Manual (Page 27)

bizhub 423/363/283/223 3-6
3.2 [Basic] 3
3.2.2 [Paper]
Select the paper type and size to be printed or change the paper size and paper type settings configured for
each paper tray.
0 The auto zoom setting and the auto paper setting cannot both be selected at the same time.
0 Be sure to specify the paper type when special paper is loaded into a paper tray.
0 If the paper size or type is not correctly specified, a paper jam may occur or image quality may deteri-
orate.
%
Press [Basic] ö [Paper].
Settings
[Auto] The paper size is automatically selected according to the original size.
Trays [1] - [4] Select the corresponding try button to manually select the desired paper.
•
The paper tray that is displayed varies depending on the installed op-
tions.
# (Bypass Tray)
[Change Settings] Press this button to specify the paper type and size for the selected paper
tray.
[Paper Type] Specify the paper type for the selected paper
tray. There are limits on the types of paper that
can be loaded in a paper tray.
•
A paper tray with the [Single Side Only] setting
selected is given priority when the single-side
printing is specified.
• [Duplex 2nd Side] (only for Bypass Tray): Se-
lect this setting in combination with the paper
type to print on paper with data printed on one
side.
[Paper Size] Specify the paper size for the selected paper tray.
•
[Auto Detect]: Automatically detects the paper
size.
• [Inch Sizes] (only for Bypass Tray): Select the
loaded paper size from the standard inch siz-
es.
• [Metric Sizes] (only for Bypass Tray): Select
the loaded paper size from the standard met-
ric sizes.
• [Other] (only for Bypass Tray): Select the
loaded paper size from the standard sizes
other than the standard metric and inch sizes.
• [Custom Size] (only for Bypass Tray): Select
the loaded paper size from the registered cus-
tom sizes.
The Custom Size settings cannot be config-
ured when no custom size is registered.
[Main Screen] Press this button to return to the basic settings screen with the changed
settings applied.