Konica Minolta BIZHUB 223 - Manual (Page 25)

bizhub 423/363/283/223 3-4
3.2 [Basic] 3
3.2 [Basic]
3.2.1 [Density]
Adjust the copy density according to the original condition. You can adjust the density of the background
area for originals with colored background (newsprints, recycle paper, etc.) or originals on thin paper showing
text or images from the back.
%
Press [Basic] ö [Density/Background].
Overview Refer-
ence
[Density/Background] Press this button to adjust the density of the copy or back-
ground according to the original condition. p. 3-4
[Paper] Press this button to configure the paper type and paper tray
for making copies. p. 3-6
[Zoom] Press this button to select the zoom ratio of the image to be
copied. p. 3-7
[Duplex/ Combine] Press this button to configure the double-sided copy and
combined copy settings. p. 3-8
[Finishing] Press this button to select the settings for sorting and the
finishing state of copies. p. 3-10
[Auto Rotate OFF] Select this item to copy the original according to the paper
orientation without rotating the image. p. 3-12
Settings
[Light] Each time this button is pressed, the density is lightened by one level.
[Standard] Press this button to select the center setting (default setting).
[Dark] Each time this button is pressed, the density is darkened by one level.