Konica Minolta magicolor plus - Manual (Page 17)

E-17
Fine Adjustment of the Captured Image
When the positions of the personal computer captured image and the Captureboard capture image (such as writ-
ings and drawn on the board surface) differ on the Superimposed Image Display Screen, this function changes
the position or size of the personal computer capture image on the Superimposed Image Display Screen.
Superimposed Image Display Screen
This software creates on the personal computer a superimposed image of the image transferred to the personal comput-
er (that was hand written and drawn on the sheet surface of the Captureboard) and the personal computer screen (which
is the screen output for projection by the projector).
When the keystone distortion (horizontal distortion/vertical distortion) of the image projected by the projector is adjusted,
it will be slightly smaller than the output screen from the personal computer screen. (The size of the image changes
depending on the degree of distortion compensation.) This is a result of the compensation characteristics of the projector.
As a result, the position matching or image size will differ slightly. The position move adjustment or the image size adjust-
ment are used to correct this condition.
Adjusting the Image Size or Distortion
A left click on the personal computer capture image will display the pointers (in 8 locations).
Drag the pointers and adjust.
Right click to delete the pointers.
Adjusting the Display Position of the Image
Drag the personal computer capture image to the target position.
To stretch vertically
Drag the center top or bottom
pointer.
To stretch horizontally
Drag the center left or right pointer.
To stretch diagonally
Drag the pointers of the four corners.
Note
Basic Operation
Model C-12W captureboard