Konica Minolta magicolor plus - Manual (Page 15)

E-15
Click the (Scan) Button of the Menu
Displays the projection image superimposed screen.
Click [Yes]
The sheet surface of the Captureboard will be scrolled, the
capture will start and be completed.
Then the hand written and drawn image will be transferred
to the personal computer.
In a little while the superimposed image display screen will
open.
When the personal computer capture image and the
Captureboard capture image are shifted on the superim-
posed image display screen, see “Fine Adjustment of the
Captured Image” on Page E-17.
If you do not want to combine the hand-drawn image on
the sheet surface with the projector's projected image, click
"No".
When "No" is clicked, the captureboard capture image pre-
view is displayed.
Click (Save) to Save
• When saving for the first time, clicking will display the personal
computer [Save as] box.
Select “Save location” “File type”, enter the file name, then click
the [Save] button.
• Select the file type ("PNG", "JPG" or "PDF") using the ▼ button.
• A file name consisting of the model name, date and serial num-
ber (ex. C-12_081021_01) is displayed automatically. Change it
if necessary.
• If a file with the same name already exists, the old file is
overwritten.
• To create a new folder, click [Create new folder] or click the
icon, enter the folder name in the newly created folder, then click
[Open].
Next, select the file type, enter the file name, then click [Save].
• [Save] or [Save as] can be selected from [File] of the menu bar.
Continued on next page
Basic Operation
• Black and white is set if "Prohibit Color Mode" is set to "On" in "Machine Settings".
• Use the Density button on the main unit's control panel to set the scanning density.
• When "Header/Footer" is set to "On" in "Hardware Setup" (see page E-22), the header/footer information is dis-
played on the combined image. In this case, this information is saved and printed.
Note