Konica Minolta MS7000 MKII - Manual (Page 58)

Scanner 3
3-32
3.17 Entering the Number of Prints to be Made
1 to 9
1 Enter the desired number of
prints using the Multiprint
Key "1".
If the "1" key is pressed when "9" is shown on the Multi-Print
Display, the number on the display is incremented by one: 10
→
11
→ 12 ...
10 to 99
1 Set the tens digit using the
"10" key.
2 Set the units digit using the
"1" key.
To set "25," press the "10"
key twice and press the "1"
key four times.
Correcting a Number
1 To reset an entry, press the
Clear/Stop key, which resets
the number on the Multi-
Print Display to "1."
0816773201.book 32 ページ ２００４年６月２４日 木曜日 午後６時１４分