beautypg.com

4 how to use fax/scan mode, 1 general fax/scan operation, How to use fax/scan mode – Konica Minolta BIZHUB C652DS User Manual

Page 42: General fax/scan operation -2, 4how to use fax/scan mode

background image

bizhub C652/C652DS/C552/C552DS/C452

4-2

4.1

General fax/scan operation

4

4

How to use Fax/Scan mode

This section describes the basic fax/scan operations in the enlarge display mode.

d

Reference

For details on the fax and scan operations, refer to the "User's Guide [Network Scan/Fax/Network Fax
Operations]".

4.1

General fax/scan operation

The following describes the general fax/scan operation.

0

Register addresses using the setting menu, and configure the fax and network settings and register
addresses in Administrator Settings in advance.
For details, refer to the "User's Guide [Network Administrator]" and the "User's Guide [Network
Scan/Fax/Network Fax Operations]".

1

Press the [Fax/Scan] key, and then the [Enlarge Display] key on the control panel.

The enlarged display screen for Fax/Scan mode appears.

2

Load the original.
For details on loading originals, refer to page 2-13.

3

Specify the destination.

% For details on specifying a destination, refer to page 4-5.

% If the destination was incorrectly specified, press the [C] (clear) key, and then specify the destination

again.

This manual is related to the following products: