4 [mode memory, Mode memory] -7, P. 2-7 – Konica Minolta BIZHUB C652DS User Manual
Page 15
bizhub C652/C652DS/C552/C552DS/C452
2-7
2.1
Control panel and functions
2
d
Reference
You can also configure the default enlarge display settings in the Accessibility screen. For details, refer to
page 2-8.
2.1.4
[Mode Memory]
Display the Fax/Scan screen, and then press the [Mode Memory] key to recall a fax/scan program in which
destination and scan settings are collectively registered. This is convenient for frequently sending data under
the same conditions.
0
You must register programmed settings using the standard screen in advance.
0
For details on registering programs, refer to "User's Guide [Network Scan/Fax/Network Fax
Operations]".
%
Display the Fax/Scan screen, and then press the [Mode Memory] key.
Settings
Default Enlarge Display
Settings
Current Setting
The settings configured before pressing the [Util-
ity/Counter] key are registered as the default set-
tings for Copy or Fax/Scan mode.
Factory Default
The factory default settings are registered as the
default settings for Copy or Fax/Scan mode.
Settings
Recall Scan/Fax Program
Select the desired program. Only one program can be selected.
Page List
Select the page to be displayed.
Previous page
Press either of the two buttons to move to the previous or next page.
Next page