Konica Minolta BIZHUB C652DS - Manual (Page 12)

bizhub C652/C652DS/C552/C552DS/C452 2-4
2.1 Control panel and functions 2
Adjusting the angle of the control panel
You can adjust the angle of the control panel of this machine to three different levels. You can also tilt the
control panel to the left.
Set it to your desired angle.
NOTICE
Do not adjust the control panel in the horizontal direction while directly
holding the touch panel.
%
Pull the control panel release lever toward you, and then slowly
move the control panel up or down.
% To tilt the control panel, hold the bottom of the control panel,
and then adjust the panel in the horizontal direction.
22 [Copy] Press this key to enter Copy mode. (As a de-
fault, the machine is in Copy mode. ) While
the machine is in Copy mode, the indicator
on the [Copy] key lights up in green. p. 2-5
Overview Reference