3 how to use copy mode, 1 general copy operation, How to use copy mode – Konica Minolta BIZHUB C652DS User Manual
Page 23: General copy operation -2, R to "3 how to use copy mode" and "4, 3how to use copy mode
bizhub C652/C652DS/C552/C552DS/C452
3-2
3.1
General copy operation
3
3
How to use Copy mode
This section describes the basic copy operations in the enlarge display mode.
d
Reference
For details on the copy operation, refer to the "User's Guide [Copy Operations]".
3.1
General copy operation
The following describes the general operation for making copies.
1
Press the [Copy] key, and then the [Enlarge Display] key on the control panel.
The enlarged display screen for Copy mode appears.
2
Load the original.
For details, refer to page 2-13.
3
Configure the desired copy settings.
% For details on the Basic tab, refer to page 3-4.
% For details on the Original/Density tab, refer to page 3-14.
4
Using the keypad, enter the desired number of copies.
% If the number of copies was incorrectly entered, press the [C]
(clear) key in the keypad, and then enter the correct number of
copies.