4 density, 5 background removal, Density -17 – Konica Minolta BIZHUB C652DS User Manual
Page 38: Background removal -17, P. 3-17
bizhub C652/C652DS/C552/C552DS/C452
3-17
3.3
Original/Density
3
3.3.4
Density
Adjust the copy density according to the original condition.
%
Press [Original/Density] ö [Density].
3.3.5
Background Removal
You can adjust the density of the background area for originals with colored background (newsprints, recycle
paper, etc.) or originals on thin paper showing text or images from the back.
%
Press [Original/Density] ö [Background Removal].
Select this setting for an original loaded into the ADF with the top of the
original toward the right side of this machine.
Select this setting for an original placed on the original glass with the top
of the original toward the left side of this machine.
Main Screen
Press this button to return to the basic settings screen with the changed
settings applied.
Settings
Settings
Light
Each time this button is pressed, the density is lightened by one level.
Standard
Press this button to select the center setting (default setting).
Dark
Each time this button is pressed, the density is darkened by one level.
Main Screen
Press this button to return to the basic settings screen with the changed
settings applied.
Settings
Bleed Removal
Select this setting to remove background prints of the original. Normally,
select [Bleed Removal].